New products

  • Compact 2-way HDMI 2.0 splitter which supports resolutions up to 4K and 18Gbps bandwidth. Compact and low profile design, ideal for mounting behind a monitor. Supports video resolution downscaling and CEC pass-though.      

  • The IPA400TR is a network AV Transceiver with HDMI input and output up to resolution 4K@60Hz 4:4:4, HDR. It is designed for HDMI transmission over IP network with external audio and control signals at distance up to 100m over SFP+ cable. It works with one control PC (Wake on LAN) and one 10GbE Switch to control a variety of functions.

  • The WUH4-HUB is an HDMI 18G & USB 3.0 4x1 Switcher with four SC-GRHU table grommets. This switcher features four HDMI video inputs and one HDMI output. It supports HDMI video resolution up to 4Kx2K@60Hz 4:4:4 HDR 10 and Dolby Vision. The switcher provides four type-B USB ports and three type-A USB ports for KVM management, the four HDMI computers can...

  • The WUH3C is a compact and energy saving 3-way HDMI auto switcher. The device is powered by the HDMI signal and doesn't require an external power source. You can control the WUH3C with the provided IR remote or frontpanel button. De WUH3C also support auto-switching.

  • The SCU82TS is an 8x2 multi-format seamless presentation switcher with built-in 4K scaling and HDBaseT and HDMI matrix outputs. It simplifies meeting room and presentation space system integration by providing one HDBaseT input, four HDMI inputs, one VGA input, one DP and one USB-C input. It also provides following audio embedding for HDBaseT, HDMI and...

  • The SCU42TS seamless matrix switcher simplifies meeting room and presentation space system integration by providing three HDMI inputs, one USB-C input, one HDMI output and one HDBaseT output with one HDMI loop output. It also provides external one audio input to be embedded in the first HDMI input. Moreover, it provides one MIX audio input and one MIC...

  • The IPA300TR is a network AV Transceiver with HDMI input and output up to resolution 4K@60Hz 4:4:4, HDR. It is designed for HDMI transmission over IP network with external audio and control signals at distance up to 100m over CATx cable. It works with one control PC (Wake on LAN) and one 10GbE Switch to control a variety of functions.

  • The SCU42T-CODEC is a conferencing system codec kit supporting resolutions up to 4K@60Hz 4:4:4 8bit and HDCP 2.2. It includesTransmitterand Receiver, providing AV switching, audio de-embedded, and USB extension, plus system control. All video, audio, control, USB and Ethernet signals can be transmitted over a single CATx cable up to 70m.

  • The MUB44 is a 4x4 USB 3.2 Matrix. This matrix allowing 4 x USB devices to be shared between 4 x host devices, supporting Plug-and-Play. The USB data transfer rate is up to 5Gbps. The Matrix provides advanced features including aweb interface modulefor control and configuration of the Matrix,along with RS-232 for seamless control integration..

  • This TPUH4120 is an HDBaseT Extender set consist of a transmitter and a receiver. It distributes 4K signal up to 131ft/40m, or 1080P signal up to 230ft/70m over CAT5e/CAT6a cable. It enables IR and RS232 pass-through to control local source device from remote or far-end display.

  • The TPUH610S is an HDMI 18G HDBaseT Extender, which consists of a transmitter and a receiver. It can extend 4K video to distance up to 131 feet (40 meters) and 1080P video to distances up to 230 feet (70 meters) over a single CATx cable. It supports audio de-embedded and ARC. 

  • TPUH610A is a fully HDMI 2.0 18G compliant HDBaseT extender set which capable of extending 4K@60Hz HDR video up to 131ft/40m or 1080P video up to 230ft/70mover a single CAT6 cable. It enables IR and RS232 pass through to control local source device or remote display, and bi-directional PoC to save power supply from either Tx/Rx end.